If you’re ready to get your pond up and running this spring, you’ll want to be sure that you take the necessary steps in order to have a well-functioning and clean pond. Here at PondMax, we have the necessary tools and products you need for your garden pond care. For pond filters and pumps, pond lighting, UV clarifiers, and more, shop our products today. To learn more about starting up your garden pond this spring, keep reading!
Steps To Get Your Garden Pond Up And Running This Spring
If you’re certain that you’ve experienced the last freeze of the winter, and temperatures in your area have been above 40 degrees Fahrenheit for more than a week, you can begin your garden pond clean-up to get your pond ready for use this spring. Follow the directions below for a simple, step-by-step clean-up process for your garden pond.
Rake up any leaves and debris that have gathered around your garden pond. Ideally, you will have installed a pond net to place over your pond in the fall so leaves won’t have found their way into the pond. If you do have a pond net in place, you can now remove it.
If there are leaves and other debris in your garden pond, you can use a pond vacuum to clean out the extra debris.
Now is the time to start tending to any water plants that you may have. You will need to take the time to cut off dead debris and repot plants if necessary. If you have aquatic plants that need fertilized, late April or early May is the perfect time to begin that process.
Ponds that do not have a significant amount of buildup should have about 25 percent of its water changed out. When adding new water, you’ll want to add a water conditioner to your pond to ensure that any chlorine or chloramines from your city water are removed.
If your garden pond has one inch or more of buildup, it’s a good idea to completely change out your pond’s water. You’ll need to set up a temporary tank for a safe place for your fish during the process. You’ll want to be sure that the difference in water temperature from the pond to the tank are no more than two degrees fahrenheit. If the temperatures vary more than that, place the fish in plastic bags with water from the pond and then place them in the temporary tank. You’ll want to check the water temperature of their temporary water and the pond water when it’s time to put them back in the pond before you release them from the bags.
Once you drain all of the old pond water, and before you fill the pond with new water, use your pond vacuum to thoroughly clean out your garden pond. If you have to step down into your garden pond in order to clean the bottom, be sure you keep your pond vacuum out of the pond. You may want to use a long brush with a handle in order to clean off any algae that has built up over the winter while the pond is completely empty. Once your garden pond is clear of debris and algae, you’ll be ready to fill your garden pond with water again.
Once you’ve completed the six steps above, you’ll be halfway through your spring cleaning for your garden pond, and you’ll be that much closer to having your pond up and running. Stay tuned for our next blog for the next steps in the pond cleaning process. If you’re in need of a pond vacuum, a new filter, or any other products for your pond care this spring, shop our products here at PondMax today!